|
|
|
 |
 |
 |
 |
Richard DiToma Plumbing Business |
 |
Dan Foley From the Field |
 |
Bob "Hot Rod" Rohr Green Systems |
 |
Ellen Rohr Business Expert |
 |
Bristol Stickney Solar Solutions |
 |
PRODUCT OF THE MONTH Jay R. Smith's Labor Saver Fixture Support The Labor Saver Fixture Support, figure number 0710, has been designed to speed up the installation process by using a one-piece rigid frame, pre-assembled steel construction. The new oxbow symmetrically designed fixture support allows room for the waste piping and features horizontal and vertical adjustability for different installation conditions. The design also allows for narrow wall and metal stud configurations. To download the 4 color brochure, or for more information, visit www.jrsmith.com |
 |
Waterless urinal using breakthrough technology The H2Zero waterless urinal by Caroma utilizes breakthrough technology to use zero water for optimum performance and water conservation. The H2Zero's unique patented cartridge technology does not use an oil-based seal, as traditionally used in waterless urinals. Within the cartridge is a Bio Fresh deodorizing block that is activated during use. The Bio Seal* allows urine to pass through the seal freely and acts as a one-way airtight valve to seal the cartridge from the drainage system. Caroma. |
 |
Grooved copper system Grooved copper system requires only a wrench for assembly on grooved end pipe, eliminating conventional soldering and brazing. Gruvlok® cts Copper System fittings mate directly to copper tube, providing a rigid and durable locked-in connection for tube size ranging from 2" to 8" dia., and because there’s a union at every joint, fast assembly is assured. Anvil® Intl. |
 |
Pressure independent control valve The optiflo valve combines an externally adjustable automatic balance valve and a full modulating control valve to provide full modulating control with 100% valve authority. Provides a desired flow (±5% of setting) regardless of fluctuations in system pressure. Available in sizes from 1/2" to 11/4" at flow rates from .3 gpm through 13.2 gpm; provides great flexibility if the system is changed after initial installation. No need to calculate valve authority, as the valve/actuator combination ensure 100% authority at all times. Bell & Gossett. |
 |
Tankless water heater The 920 ES series, at 225,000 Btuh, offers the highest flow rate of all the manufacturer’s tankless water heaters, delivering 9.2 gallons of hot water every minute, at a 45° rise, for as long as needed. Both models in the 920 ES series can also be linked, or cascaded together, to deliver even more hot water, up to 36.8 gpm in a four-unit cascade. Because the 920 ES series has both modulating and condensing technology, the heaters deliver all that water at an ultra-high thermal efficiency of 94%. Bosch Thermotechnology. |
 |
Ceramic cartridges Four improved versions of the company’s ceramic cartridge have been added. Lines affected include short stem models with an exposed cap design and long stem models with a concealed cap design. Improvements are a tighter-fitting stem retainer clip to help reduce stem displacement and shear, plus a redesigned internal stem stop to further insure precise 90° open/close operation and reduce potential breakage from applied forces. The seal washer retainer was redesigned with color-coded identification to improve its retention to the brass sleeve. Chicago Faucets. |
 |
CSST Cutter makes smooth cuts to CSST The new Model 151-CSST cutter is now available for making clean, smooth cuts to csst. The Model 151-CSST cutter is designed with floating nylon guide wheels so that it runs on the corrugations of the track while cutting the flexible gas tubing. Uses a quick-acting mechanism that allows the cutter to rapidly adjust from 3/8" to " dia. csst. The tubing cutter also utilizes the proven x-cel™ feature of a larger, ergonomic knob, which gives users a more firm grip that allows them to apply more force to cut through tubing faster and easier. RIDGID. |
 |
InFlow in cast iron The proven InFlow™ inline testing system now comes in cast iron as well as pvc and abs. Reduces costs and saves labor; no need for inflatable test devices. Stays in the pipe after the test, no additional materials or labor are needed; can be used as a cleanout opening like any other tee. Controls drain-down after the test is complete. Holds a water test to 20 psi; an air test to 5 psi. A safe, clean alternative to traditional testing methods for testing dwv systems. Ideal for testing in commercial applications. Sioux Chief. |
 |
Electric snowmelting HeatWeave is introducing its electric snowmelting line of both mats and cables called ProMelt. All mats and cables have a single-point connection and the mats are available in 2 ft. and 3 ft. widths. Many control options are available, and the manufacturer offers free design assistance. Reduces the chances of slip-and-fall incidences on customers’ property, and eliminates damage to driveways, sidewalks, landscaping or vehicle paint from salt and snow removal equipment. No mechanical room is necessary with the all-electric ProMelt system. Simple to install; no annual maintenance as there would be in a hydronic system. Many control options feature automatic operation. HeatWave, a div. of Watts Radiant. |
